Gen 2 F-150 engine with transmission swap 33k miles

Availability to be confirmed

$2,900.00

Condition

Please contact our team to confirm.

OEM number

Please contact our team for verification.

Please contact our team to confirm product specifications, compatibility and availability before ordering. Ask about this item

Confirm fitment with your VIN. Send your VIN and current engine or transmission code and we will check this unit against your vehicle before fulfilment. Website selections alone do not guarantee fitment.

Specifications

Availability: Availability to be confirmed

Specifications are listed as verified for this unit. Confirm compatibility with your VIN before ordering.

Gen 2 F-150 Coyote Engine Specifications
Specification
Details
Engine
Ford 5.0L Coyote V8 (Gen 2)
Production
2015–2017
Engine Code
Coyote Gen 2
Configuration
90° V8
Block Material
Aluminum
Cylinder Heads
Aluminum DOHC
Valvetrain
DOHC, 32 valves
Variable Valve Timing
Twin Independent Variable Cam Timing (Ti-VCT)
Displacement
4,951 cc (302 cu in)
Bore
92.2 mm (3.63 in)
Stroke
92.7 mm (3.65 in)
Compression Ratio
10.5:1
Fuel System
Sequential Multi-Port Fuel Injection
Fuel Required
Regular or Premium gasoline
Firing Order (Truck)
1-3-7-2-6-5-4-8
Redline
Approximately 6,500 RPM
Performance
Specification
Output
Horsepower
385 hp @ 5,750 rpm
Torque
387 lb-ft (525 Nm) @ 3,850 rpm
Maximum Engine Speed
Approximately 6,500 rpm
6R80 Automatic Transmission Specifications
Specification
Details
Transmission
Ford 6R80
Type
6-Speed Automatic
Drive
RWD / 4WD
Manual Mode
SelectShift
Tow/Haul Mode
Yes
Lock-up Torque Converter
All forward gears
Gear Ratios
Gear
Ratio
1st
4.17
2nd
2.34
3rd
1.52
4th
1.14
5th
0.87
6th
0.69
Reverse
3.40
The 6R80 is known for its low first gear for towing and two overdrive gears for efficient highway driving.
Complete Engine & Transmission Swap Package
A complete Gen 2 swap is easiest when sourced from a single donor vehicle.
Engine Assembly
Complete 5.0L Gen 2 long block
Intake manifold
Throttle body
Fuel rails
Injectors
Alternator
Starter
A/C compressor
Power steering (if applicable)
Exhaust manifolds
Engine mounts
Transmission
6R80 automatic
Torque converter
Flexplate
Transmission cooler lines
Transmission crossmember
Transmission mount
Driveshaft (often requires modification depending on the chassis)
Electronics
Engine wiring harness
Transmission harness
Powertrain Control Module (PCM)
Body Control Module (if required)
Accelerator pedal (drive-by-wire)
OBD-II diagnostic port
Key/PATS security components or compatible tuning solution
Cooling System
Aluminum radiator
Electric cooling fans
Transmission cooler
Radiator hoses
Overflow tank
Fuel System
High-pressure in-tank fuel pump
Fuel filter
Fuel lines
EVAP components (if emissions compliance is required)
Exhaust
Factory exhaust manifolds or swap headers
Catalytic converters (if required)
Custom exhaust system
Dimensions (Approximate)
Specification
Measurement
Engine Weight
~445–460 lb (202–209 kg)
Engine Width
~29 in (737 mm)
Engine Length
~28 in (711 mm)
Engine Height
~27 in (686 mm)
Best Vehicles for a Gen 2 Coyote Swap
Common swap candidates include:
1997–2003 Ford F-150
2004–2008 Ford F-150
1980–1996 Ford F-150
Ford Bronco
Ford F-100
Ford Mustang
Ford Ranger (with fabrication)
Custom hot rods and off-road builds

Shipping & warranty

Warranty

Warranty terms vary by product. Contact us before ordering. Warranty information

Shipping

Shipping is quoted according to product and destination: freight across Canada and international export. How shipping works

Returns

Eligibility depends on the unit and the reason for return. Returns & refunds

Engines and transmissions ship by freight on a pallet. Inspect the shipment when it arrives and note any visible damage with the carrier before signing. Delivery inspection guide

Ask about availability or fitment

Send your details and we will confirm availability and the freight cost to your country before you order. Add your vehicle and VIN if you would like us to check fitment at the same time.